Call us at (503) 371-7907 or Email: info@agsprayinc for cost or bid on any of our products
Products
WA-100 + Is a penetrating surfactant adjuvant. It maximizes the effectiveness of Glyphosate without AMS. It help to reduce the surface tension to 25 dynes/cm. WA-100+ lowers PH of spray solutions, and is Nonionic, non-foaming, and 100% active.
To reduce surface tension to 25 dynes/cm : 1 quart per 100 gallons
As a plant penetrator: 1-4 quarts per 100 gallons
With glyphosate: 2-4 quarts per 100 gallons
|
DOWSE is an 85% active, water soluble, and nonionic all purpose wetter-spreader. It can reduce surface tension to an amazing 25 dynes, enabling coverage of virtually any leaf surface.
To reduce surface tension to 25 dynes/cm: 24 ounces per 100 gallons
As a super-wetter spreader and dispersant: 32 ounces per 100 gallons
As a plant penetrant: 64 Ounces per 100 gallons
Fire Fighting: 1-2 Pints per 1000 gallons
INCITE 90 is an 80% active nonionic agricultural spray tank adjuvant.
INCITE 90 is a general purpose spreader activator for increasing the
efficiency of various agricultural chemicals. It reduces surface tension
to 27 dynes/cm. Use wherever an 80% active NIS is recommended.
Directions for use:
As a wetter-spreader : 32 ounces per 100 gallons
As a plant penetrator: 62-128 ounces per 100 gallons
To reduce surface tension to 27 dynes/cm: 53 ounces per 100 gallons
All-in-one product! REVELATION makes tank mixes for herbicides and pesticides easy and super-effective, raising chemical efficiency by up to 100%
1 gallon REVELATION will treat 800 to 1,000 gallons of water for spray mix. Combining all of these into one easy-to-use formula:
Non-Ionic Surfactant-AMS Replacement
Anti-Foaming Agent-Plant Penetrator
Water Softener-Plant Sticker-pH Buffer
INVADE is an 80% active nonionic agricultural spray tank adjuvant.
INVADE is a unique blend of surfactants providing surface tension reduction to as low as 25 dynes/cm. When the correct quantity of INVADE is used, it will produce a smooth wetted surface which reduces the possibility of spot
Directions for use:
1 quart per 100 gallons
Directions for use: 2-4 ounces per 100 gallons of spray solution.
Always follow pesticide manufacturer's recommendations.
Can only ship this product locally with our truck. Can not ship by UPS
HALT is a drift reduction agent. Halt influences droplet size, and greatly reduces
driftable fines, while increasing pesticide efficacy. It does not alter spray
viscosity, and is not susceptible tp pump shear. Non petroleum based.
Typical usage: 16-24 ounces per 100 gallons
ANTIFOAM 20 is a 20% active defoamer. Use in spray tank mixes
to keep foam from forming, or to eliminate foam altogether.
Typical usage: 1/2-1 ounce per 100 gallons of water
SS-100 is a Spreader/Sticker "Anti-Transparent and is 56% active, and non-foaming.
It is a latex based spreader-sticker. This is an excellent choice for use with copper and
other pesticides, that require a tenacious sticking agent. Also can be used as an anti-transparent.
Chemical life rate of SS-100:
Last up to 1 week at 8 ounces per 100 gallons
Last up to 2 weeks at 16 ounces per 100 gallons
Last up to 3 weeks at 24 ounces per 100 gallons
Last up to 4 weeks or more at 32 ounces per 100 gallons
FOAMLINE is an 80 to 1, water soluble agricultural foam
marking concentrate. Foamline provides dense, high
expansion foam.
Typical usage rate: 2 quarts per 10 gallons of water.
DURAFOAM is an extra long lasting foam.
It is ideal for hot and dry days on bare ground.
It lasts up to 10 times longer than other brands.
It is not affected by freezing. Superior results are
achieved when using a high pressure foam marking
system.
Directions for use: Add 2-3 quarts per 10 gallons of
water and mix well.
Mixed at 3 quarts, DURAFOAM will last approximately
1 hour on bare ground, on a 90 degree day.
Mixed at 1 pint DURAFOAM plus 1 pint FOAMLINE per
10 gallons of water for a mark that will last longer than
FOAMLINE alone.
C02-98 is a 100% active oil concentrate, and will enhance the activity of post emergent applied
herbicides, fungicides, and insecticides. This oil is for use on plants in foliage or the dormant
stages. C02-98 contains only the highest quality refined phytonomic petroleum, oils and
emulsifiers. Avoid over spraying or double spraying. Use only when plants are in healthy
condition and when moisture conditions are sufficient. Plants weakened by disease, drought
or high nitrogen applications may be injured by oil.
Directions for use: Amounts given are for 100 gallons fo diluted spray.
Post-Emergent Herbicides: 1 to 3 gallons
Post-Emergent Fungicides and Insecticides: 1 to 3 gallons
Always spray C02-98 while the spray tank is under agitation.
A-99 Premium Crop Oil Concentrate is 84% premium mineral oil and 16% NIS blend.
A-99 is a 100% active, nonionic, nonvolatile, emulsifiable crop oil concentrate.
A-99 enhances the penetration of many pesticides through the waxy layer of cuticle
on a leaf surface increasing the rate of penetration. A-99 is designed for use with
a broad range of EC based pesticides, and where crop oil concentrate type adjuvants
are recommended. We use only an oil of the highest quality.
Directions of use:
ATRAZINE: 1-2 quarts per acre
LADDOK: 1 quart per acre
POAST: 1 quarts per acre
TILT, QUADRIS, QUILT: 1 gallon per 100 gallons
All names are registered trademarks
MSO-100 is an 100% active agricultural derived crop oil concentrate.
Directions for use:
Post emergent Herbicides: 1 to 2 pints per acre
Fungicides and Insecticides: 1 to 2 quarts per 100 gallons
ACCENT: 1 gallon per 100 gallons
ASSERT or PURSUIT: 1 to 2 pints per acre
BEACON: 1.5 pints per acre
HOELON: 1 to 2 pints per acre
All names are registered trademarks
INFIX Silicone/Methylated Seed Oil Blend
Directions for use:
As a Spreader: 1 pint per 100 gallons
As a plant penetrant: 2-4 pints per 100 gallons
With Fungicides: 1-2 pints per 100 gallons
STRIKE is a 100% active, nonvolatile agricultural spray tank adjuvant,
designed to Maximize all three abilities--------Spreading, Penetrating
and Drift reduction. Strike is a superb Spreader Penetrant, plus drift
reducer. This is for use with a wide variety of pesticides. The drift
agent in the product does not alter spray viscosity, and is not susceptible
to pump shear. This is a Non-petroleum based for use with a wide variety
of insecticides, fungicides, and herbicides.
Typical use rate:
32 ounces per 100 gallons
For maximum penetrating and Drift control:
64 ounces per 100 gallons
In the field of wetting surfactants, only one rule applies: Make water Wetter!
Qwench has been formulated to give you an advantage in all facets of turf
care. Its ability to reduce surface tension to 25 dynes/cm with just 24 OZ
per 100 gallons of water, is something that most surfactants are incapable
of achieving.
Treating hydrophobic soil:
Once the soil surrounding the roots of foliage builds up a waxy layer, or the
roots begin to exhibit fungal hyphae. Now the ability to naturally reach proper
soil moisture is rendered completely impossible.
Qwench enable the soil to reach full absorption, allowing needed hydration
along with proper nutrients to reach deep into the soil, and achieve a proper
ratio of: 50% solids, 25% water, and 25% air, which is essential to maintain
lush turf.
Direction for use:
Soil wetting agent:
Turf,Golf Course Tees, and Fairways: Apply 3 OZ per 1000ft2 early spring,
then repeat at 2 OZ per 1000ft2 every 4-6 weeks in sufficient water for good
coverage to over come hydrophobic soil conditions.
Dew Control:
Apply 2 OZ per 1000ft2
Spray adjuvant:
24 OZ brings the surface tension
down to 25 dynes/cm
"We've been applying Qwench on tees and fairways for 2 years and are seeing good results. We're are using less water and the turf has been more consistently firm and green. A good product and excellent value."
Greg Doyle, Diamond Woods Golf Course, Monroe OR
Please call us for pricing on all Micro-Trak consoles and cables.